Biosorption for Wastewater Contaminants. Группа авторов

      Taking into account population growth, the need for food has significantly increased. To supply demand, the manufacturing and application of biocides have become increasingly necessary to guarantee crops and preserve them against stronger adverse agents (insects and other organisms). Such chemicals are made to be recalcitrant and toxic. Thus, they need to be properly removed from agricultural and industrial wastewaters so they do not affect human health through food.

      Human activities have increased the consumption of organic and recalcitrant compounds such as phenols, VOCs, DDT, PCHs, PAHs, PCBs, POPs, etc., but these substances are proven to be carcinogenic, teratogenic, and mutagenic, besides being persistent in the environment. Commonly, industrial wastewater containing recalcitrant compounds contains other toxic materials that may affect biological treatment, given that advanced oxidation processes have been addressed and shown more suitable results.

      Considering a more recent approach, contaminants of emerging concern must be highlighted. Even at small levels, they have shown harmful effects in humans and are capable of disrupting the endocrine system and causing other, as‐yet‐unknown impacts. Such pollutants are persistent in the environment and result from human activities. Hence, the list of these compounds is constantly growing and must be studied in depth.

      The industrial sector has to acknowledge the impacts and complexity of its contaminants for humans and the environment. Therefore, suitable treatment methodologies must be developed and addressed. Once such understanding is adopted worldwide, hazardous impacts from these activities will not be a threat but instead can be properly controlled and made harmless.

References

      1 Alade, A.O., Jameel, A.T., Muyubi, S.A. et al. (2011). Removal of oil and grease as emerging pollutants of concern (EPC) in wastewater stream. IIUM Engineering Journal 12 (4). doi:10.31436/iiumej.v12i4.218.

      2 Akpor, O.B., Ohiobor, G.O., and Olaolu, T.D. (2014). Heavy metal pollutants in wastewater effluents: sources, effects and remediation. Advances in Bioscience and Bioengineering 2 (4): 37. doi:10.11648/j.abb.20140204.11.

      3 Arbabi, M., Hemati, S., and Amiri, M. (2015). Removal of lead ions from industrial wastewater: A review of removal methods. International Journal of Epidemiologic Research 2 (2): 105–109.

      4 Azad, A.K. (ed.) (2018). Advances in eco‐fuels for a sustainable environment. Woodhead Publishing.

      5 Barak, H., Brenner, A., Sivan, A., and Kushmaro, A. (2020). Temporal distribution of microbial community in an industrial wastewater treatment system following crash and during recovery periods. Chemosphere 258: 127–271.

      6 Barakat, M.A. (2011). New trends in removing heavy metals from industrial wastewater. Arabian Journal of Chemistry 4 (4): 361–377.

      7 Barrows, J.N., Lipman, A.L., and Belai, N. (2014). History of US regulation of color additives and colorants. In: Food Additives and Packaging (ed. V. Komolprasert and: Turowski), 57–71. American Chemical Society.

      8 Bilińska, L., Blus, K., Bilińska, M. et al. (2020). Industrial textile wastewater ozone treatment: catalyst selection. Catalysts 10 (6): 611. doi:10.3390/catal10060611.

      9 Bollmann, U.E., Tang, C., Eriksson, E. et al. (2014). Biocides in urban wastewater treatment plant influent at dry and wet weather: Concentrations, mass flows and possible sources. Water Research 60: 64–74. doi:10.1016/j.watres.2014.04.014.

      10 Buthiyappan, A. and Raman, A.A.A. (2019). Energy intensified integrated advanced oxidation technology for the treatment of recalcitrant industrial wastewater. Journal of Cleaner Production 206: 1025–1040.

      11 Calderón, O.A.R., Abdeldayem, O.M., Pugazhendhi, A., and Rene, E.R. (2020). Current updates and perspectives of biosorption technology: an alternative for the removal of heavy metals from wastewater. Current Pollution Reports 6 (1): 8–27.

      12 Chávez, A.M., Gimeno, O., Rey, A. et al. (2019). Treatment of highly polluted industrial wastewater by means of sequential aerobic biological oxidation‐ozone based AOPs. Chemical Engineering Journal 361: 89–98.

      13 Chequer, F.D., De Oliveira, G.R., Ferraz, E.A. et al. (2013). Textile dyes: dyeing process and environmental impact. Eco‐Friendly Textile Dyeing and Finishing 6 (6): 151–176.

      14 Das, S. and Dash, H. (2019). Microbial Diversity in the Genomic Era. Elsevier.

      15 Diphare, M.J., Pilusa, J., Muzenda, E., and Mollagee, M. (2013). A review of waste lubricating grease management. In: 2nd International Conference on Environment, Agriculture and Food Sciences, 131–134.

      16 Dubber, D. and Gray, N.F. (2010). Replacement of chemical oxygen demand (COD) with total organic carbon (TOC) for monitoring wastewater treatment performance to minimize disposal of toxic analytical waste. Journal of Environmental Science and Health Part A 45 (12): 1595–1600. doi:10.1080/10934529.2010.506116.

      17 Duffus, J.H. (2002). Heavy metals a meaningless term? (IUPAC Technical Report). Pure and Applied Chemistry 74 (5): 793–807.

      18 Durak, J., Rokoszak, T., Skiba, A. et al. (2020). Environmental risk assessment of priority biocidal substances on Polish surface water sample. Environmental Science and Pollution Research. doi:10.1007/s11356‐020‐11581‐7.

      19 Duruibe, J.O., Ogwuegbu, M.O.C., and Egwurugwu, J.N. (2007). Heavy metal pollution and human biotoxic effects. International Journal of Physical Sciences 2 (5): 112–118.

      20 ECHA (European Chemicals Agency). (2017). Guidance on the biocidal products regulation volume IV environment – assessment and evaluation (parts B + C): Version 2.0.

      21 Eckenfelder, W.W., Ford, D.L., and Englande, A.J. (2008). Industrial Water Quality, 4e. McGraw‐Hill.

      22 Ekpu, A.O. (1995). Environmental impact of oil on water: a comparative overview of the law and policy in the United States and Nigeria. Denv. J. Int'l L. & Pol'y 24: 55.

      23 Emsley, J. (2011). Nature's Building Blocks: An A‐Z Guide to the Elements. Oxford University Press.

      24 EPA (US Environmental Protection Agency). (2017). Technical overview of volatile organic compounds. www.epa.gov/indoor‐air‐quality‐iaq/technical‐overview‐volatile‐organic‐compounds (accessed 10 April 2021).

      25 EPA (US Environmental Protection Agency). (2020). Contaminants of emerging concern including pharmaceuticals and personal care products. www.epa.gov/wqc/contaminants‐emerging‐concern‐including‐pharmaceuticals‐and‐personal‐care‐products (accessed 11 April 2021).

      26 Hallenbeck, W.H. (1986). Human health effects of exposure to cadmium. In: Cadmium in the Environment (ed. H. Mislin and O. Ravera), 131–137. Birkhäuser Basel. doi:10.1007/978‐3‐0348‐7238‐6_17.

      27 Hamid, H. and Eskicioglu, C. (2012). Fate of estrogenic hormones in wastewater and sludge treatment: A review of properties and analytical detection techniques in sludge matrix. Water Research 46: 5813–5833.

      28 Hargreaves, A.J., Vale, P., Whelan, J. et al. (2016). Mercury and antimony in wastewater: fate and treatment. Water, Air, and Soil Pollution 227 (3): 89.

      29 Hashemi, M.S.H., Eslami, F., and Karimzadeh, R. (2018). Organic contaminants removal from industrial wastewater by CTAB treated synthetic zeolite Y. Journal of Environmental Management 233: 785–792, doi:10.1016/j.jenvman.2018.10.003.

      30 Hassaan, M.A. and El Nemr, A. (2017). Health and environmental impacts of dyes: mini review. Am J Environ Sci Eng 1 (3): 64–67.

      31 Katheresan, V., Kansedo, J., and Lau, S.Y. (2018). Efficiency of various recent wastewater dye removal methods: a review. Journal of Environmental Chemical Engineering 6 (4): 4676–4697.

      32 Knapp, J.S. and Bromley‐Challoner, K.C.A. (2003). Recalcitrant organic compounds. In: Handbook of Water and Wastewater