Smart Grid Telecommunications. Ramon Ferrús

technical, market, or strategic reasons [34].

      The history of utilities cannot be understood without the telecommunication networks and services supporting their operations. The future of utilities with Smart Grid will reinforce this reality.

1.5 Challenges of the Smart Grid in Connection with Telecommunications

      There are some Smart Grid challenges tightly connected to the use of telecommunications technologies and services. They can be grouped in two broad categories Customer Engagement and Grid Control.

      1.5.1 Customer Engagement Challenges

      The Consumption Point is now transformed into a customer, with changing needs and capabilities, in contrast to its view as a plain electricity service subscriber. It is important not only that, as a customer, it demands a quality service but also that the customer has a potential to contribute to the electric power system in various forms.

      1.5.1.1 Customers as Smart Electricity Consumers

The customer is the entity driving the consumption patterns and electricity demands that, when aggregated across all the different types of customers (residential, industrial, etc.), define the power system load curve (see Figure 1.7).

      The major concern of electric power system operators, apart from the hourly consumption prediction to manage generation sources in real time, is the general reduction of the curve peaks, and the possibility to control the load (consumption) at the moments where the system may not be prepared to cope with it.

      If the consumption pattern can be influenced, the total electricity demand can be flattened, while keeping total energy consumed the same. This effect implies that the system does not need to be dimensioned to cope with the worst‐case condition of electricity demand. On the other hand, the system operator needs to have tools available to control the loads present in the network (i.e., to be capable of reducing the number of them connected or, to curtail their consumption) in a near‐real‐time manner.

The customer needs to be convinced of taking a more active role to yield part of his freedom to consume to the system operator (for a certain incentive), for the system to be optimized. To favor such involvement, customers need to be aware of the offered possibilities, and this is when they need to perceive the usefulness of their contribution and need to have easy‐to‐use access to the mechanism that enable this participation in the system. Customers will then only be convinced if they are able to easily see the result of their effort, and, if this effort is not cumbersome and facilitated by the utility through the use of processes and tools.

Figure 1.7 Sample weekly aggregated electricity demand curve. Consumption in the Spanish peninsula.

      Source: Real‐time Spanish Electricity Demand [38].

      DSM is the key concept to get the customer to participate in the electric power system. DSM includes all the activities performed by the utilities to “influence” the customer demand to balance instantaneous grid electricity supply with the demand. DSM groups together a set of activities including pure energy efficiency initiatives, where Demand Response (DR) is the most important one (see Chapter 5).

      1.5.1.2 Customers as Energy Generators

      Customers have now a set of technologies (DER [39]) that allow them to participate as an agent that has the possibility of producing part of the energy they need, and even help the grid, making any excess of generation available for the system.

      There are multiple DER elements, including DG but also Energy Storage (ES), and not forgetting Electric Vehicles (EVs), that play a role for the system (positive, as “batteries on wheels”; challenging, as “moving loads”) further than their direct environmental impact (reduction in fossil energy sources consumption).

      DG includes wind power, solar power, geothermal power, biomass, and fuel cells. They can be manageable or unmanageable from the grid perspective, depending on several factors such as their installed capacity, the availability of the energy they produce, and the connectivity and intelligence of their ancillary elements for grid integration. Notwithstanding, when these elements are available and connected at end‐user premises of small producers and communities, the consumer has the dual role of consumer and producer (i.e., a prosumer). However, the overall traditional concept of the energy power system protection and control needs to adapt to this new reality.

      EVs, on their side, have a very interesting role to play. EVs contribute to the overall energy waste reduction, system efficiency, and fossil fuels and emission reduction and are seen as moving batteries to help the system. This can be done by means of the storage of certain types of energy produced at times where the consumption cannot take advantage of them [40] and be used to charge EVs and have it delivered when and where it is needed.

      1.5.2 Grid Control Challenges

      Within the Transmission segment, challenges are those inherent to its role in the system. Despite the evolution of the electric power system technologies, Transmission has not been affected by technical disruptions that impose a new reinvention of its nature. However, their traditional functions can be pretty much enhanced.

      The need to keep energy loss at a minimum justifies the need to understand and control the different power line parameters involved in ampacity (i.e., maximum value of electric current – Amperes) calculations. Grid stability is another concept of great importance, as the connection of bulk‐generation at different parts of the network can cause instability if the voltage phase difference between the power signals is too different at the two ends of the line. Last but not least, harmonics of the fundamental frequency (50 or 60 Hz) have to be controlled, as they would be propagated along the grid, impacting overall quality of the electricity wave.

      There are other needs related with the physical aspects of the cables, leading to keep the infrastructure available and extending its useful life [41]. There is a growing need to easily detect the origin of faults in the power lines and be able to identify and communicate its exact location. These needs can be supported with modern telecommunications‐related technology. These technologies can also help to control strain in the cables when they are being laid out, specifically in cables under special conditions (e.g., submarine routes).

      Distribution grid challenges are the ones that have been driving the evolution of the Smart Grid concept in the network control side. The paradigm of a static unidirectional network delivering electricity from the core to the edge has changed into an entangled mix of new technologies and assets, with varied properties, that needs to be organized. The new idea of a “platform” [42], rather than a “grid” that can serve the different Distribution grid stakeholders, has become popular due to its use in some major initiatives.

      Automation tries to drive the grid toward becoming a self‐healing entity. Automation in utilities consists of Substation Automation (SA) and Distribution Automation (DA). Automation process started at substation level, mainly PSs (hence SA), and moved out toward the edge (hence DA), increasing its ambition to reach every corner of the grid with that kind of automatic signals driving electricity through the most appropriate routes (like information is routed in telecommunications networks, differences aside). The aid of ICTs and telecommunications in grid automation is highlighted in [43] with the term ADA (Advanced Distribution Automation). The ultimate objective of the self‐healing grid is to improve the service availability introducing efficiencies in the grid operation (less manual and field interventions).