Imagery and GIS. Kass Green

precision of the sensor making the measurements. Sensors that capture imagery return numerical values within a range defined by the sensing instrument.

      Most remote sensors collect data in a rectangular array, and remotely sensed data not captured in a rectangular array is usually resampled into a rectangular array after collection. Examples of image data include imagery collected from optical sensors, such as that collected by USGS’s Landsat satellites and by contractors collecting aerial National Agricultural Imagery Program imagery for the USDA.

      Discreet point location measurements, such as those from weather stations or buoys, are also represented in a rectangular array. Three-dimensional (x, y, and z) point data, such as that collected by lidar sensors, is referred to as a point cloud, but also often transformed into a rectangular array for both visualization and analysis (figure 2.2).

      Figure 2.2. Lidar returns from a Teledyne Optech Titan bathymetric lidar system. The image is color coded by elevation for both topographic height and water depth. Source: Teledyne Optech.

      Image files are structured as gridded rectangular arrays or raster data, with each cell representing a measurement value captured by the remote sensing measurement. The data is stored as rows and columns of contiguous rectangular cells laid out in a grid (figure 2.3). Each cell contains a value. The values may be integer or floating point. The cells of an image raster are often referred to as picture elements or pixels and contain data values that measure some characteristic of each cell’s location, such as its temperature, elevation, or spectral reflectance.

      Because each cell has both a row and column location within the grid, the cells have inherent coordinates even though those coordinates may still need to be converted to map coordinates if the imagery is to be used in a GIS with other GIS layers (see chapter 6 for more information on georeferencing imagery).

      Figure 2.3. A two-dimensional raster grid. Most imagery is stored as a raster where each cell is referred to as a pixel and has an associated x and y coordinate.

       Imagery and GIS

      If imagery data has geographic coordinates, it can be incorporated into a GIS as a layer and registered with the other geographic layers in the GIS. This overlay capability is the fundamental concept upon which GIS operates. When combined with other GIS data, imagery transcends its status as merely a picture and becomes a true data source that can be combined, compared, analyzed, and classified with other data layers of the same area, as shown in figure 2.4.

      Figure 2.4. Imagery as a GIS layer

      For use in a GIS, imagery is usually stored as it has been collected: in raster format. Point imagery data can be converted to raster data either by giving the cells between the sample points values of zero or by interpolating between the sample points. Similarly, line and polygon data can also be converted to raster representations and so handled similar to images.

       Rasters versus Vectors

      GIS data is stored as either rasters or vectors. Vectors represent the world with points, lines, or polygons. A point is one location represented by x, y, and z coordinates. A line is a linear connection between points. Sometimes lines are connected into a network of topologically connected lines. A polygon is a set of lines joined together to enclose an area. Polygons are drawn to outline the shape of an object of interest.

      Rasters divide the landscape into a grid of equal-area rectangular cells. The rectangular shape of an individual cell does not represent a specific object on the ground. Rather, the cell is an arbitrary delineation. Lines or polygon shapes on the ground are represented by connected raster cells, as shown in figure 2.A.

      Most imagery is collected as raster data, which is why most imagery is captured and stored as rasters. Because of the simple structure of rasters, raster spatial analysis is relatively uncomplicated. However, unlike vectors, rasters do not have meaningful boundaries. In a raster, a lake is a cluster of spatially adjacent cells classified as water. There is no way to analyze the lake as a singular object—it is merely a collection of connected water cells. In a vector system, a lake is a polygon object with a defined boundary, which also carries information about the other objects sharing its boundary. As a result, we can measure the size of the lake, analyze the wildlife habitat next to the lake, and measure the distances from the lake to cabins. Vector spatial analysis is usually more computationally intensive than raster analysis, but vectors also better represent the shapes of the world as they actually exist, with curves and straight lines. As a result, vector maps are more aesthetically pleasing. Fortunately, raster maps can be converted to vector maps and vice versa, which means that map users can thoughtfully choose which data structure will best meet their needs. However, conversion from raster to vector or vector to raster data introduces changes that can potentially create errors, and care must be taken when this process is performed.

      Figure 2.A. Representation of points, lines, and polygons in vector and raster formats

       Characteristics of Rasters

      Because most imagery is captured and stored as rasters, it is important to understand the characteristics of rasters, such as type, bands, and cell size.

       Type

      The cells of rasters can contain either continuous or discrete values. As mentioned earlier, image data is continuous. However, when we classify an image into information, the resulting values can be either continuous, as in an elevation model (figure 2.5), or discrete, as in a land use map such as that shown in figure 2.6. Unlike continuous data, discrete data classes cannot be mathematically divided more finely. Discrete information can take on only finite predefined values such as “tank,” “lake,” “urban,” “forest,” “building,” or “agriculture.” Rasters of discrete values represent information that has been classified from image data; they are no longer considered images, but are rather now raster format maps.

      Figure 2.5. An example of a continuous raster in the form of a digital elevation model (DEM)

      Figure 2.6. A thematic map showing discrete land-cover classes present in the Coastal Watershed in southeastern New Hampshire created from Landsat 8 imagery

       Bands

      Imagery measurements are collected and stored in raster bands. For example, a panchromatic image raster includes only a single band of measurements, shown as a single layer in figure 2.3, and is typically shown in grayscale. Multispectral imagery contains several bands of measurements, as shown in figure 2.7. Figure 2.8