Optical Engineering Science. Stephen Rolt

(4.14)

      Rearranging:

In applying the binomial approximation, one needs to be careful with regard to the sign convention. It should be accepted that each of the square root terms in Eq. (4.14) is positive for a real object and real image. That is to say, all rays are physically traced to the appropriate location. In the case of a mirror surface, the definition of a real image corresponds to a negative image distance, u. Once again, we examine the paraxial terms

(4.15)

      As for the refractive surface we expand Eq. (4.14) using the binomial theorem to give terms of the fourth order in OPD.

(4.16)

As with the refractive case, four of the five Gauss-Seidel terms are present – spherical aberration, coma, astigmatism, and field curvature. There is also no distortion. As previously, Eq. (4.16) can be simplified considering u, v, and R as dependent variables, as related in Eq. (4.15). We can, once more, express the OPD in terms of u and R alone. Splitting the OPD contributions in Eq. (4.16) into Spherical Aberration (SA), Coma (CO), Astigmatism (AS), and Field Curvature (FC) and with a little algebraic manipulation we have:

(4.17a)

      (4.17b)

(4.17c)

      (4.17d)

Equations (4.17a)–(4.17c) bear some striking similarities with respect to those for the refractive surface. In fact, if one substitutes n = −1 in the corresponding refractive formulae, one obtains expressions similar to those listed above. Thus, in some ways, a mirror behaves as a refractive surface with a refractive index of minus one. Once again, there are aplanatic points where both spherical aberration and coma are zero. This occurs only where both object and image are co-located at the centre of the spherical surface. The apparent absence of field curvature may appear somewhat surprising. However, the Petzval curvature is non-zero, as will be revealed. We can now cast all terms in the form set out in Chapter 3 and introduce the Lagrange invariant, which is equal to the product of r₀ and θ₀ (the maximum field angle):

      (4.18a)

      (4.18b)

(4.18c)

(4.18d)

The Petzval curvature is simply given by subtracting twice the K_AS term in Eq. (4.18c) from the field curvature term in Eq. (4.18d). This gives:

      (4.19)

Figure 4.6 Petzval curvature for mirror.

In this instance, the Petzval surface has the same sense as that of the mirror itself. However, the radius of the Petzval surface is actually half that of the original surface. This is illustrated in Figure 4.6.

Calculation of the Petzval sum proceeds more or less as the refractive case. However, there is one important distinction in the case of a mirror system. For a system comprising N mirrors, each successive mirror surface inverts the sense of the wavefront error imparted by the previous mirrors.

      (4.20)

4.4 Refraction Due to Optical Components

      4.4.1 Flat Plate

      Equations (4.5a)–(4.5d) give the Gauss-Seidel aberration terms for a spherical reflector. However, for a flat surface, where 1/R = 0, the aberration is non zero.

      (4.21)

      If we now make the approximation that r₀/u∼NA₀ and express all wavefront errors in terms of the normalised pupil function, we obtain the following expressions.

(4.22)

In all expressions, the wavefront error is proportional to the object distance. Equation 4.22 only considers refraction at a single surface. For a flat plate whose thickness is vanishingly small, it is clear that refraction at the second (glass-air) boundary will produce a wavefront error that is equal and opposite to that induced at the first surface. Furthermore, it is also clear that the form of wavefront error contribution will be identical to Eq. (4.22), but reversed in sign. For a glass plate of finite thickness, t, the effective object distance, expressed as the object distance in air, will be given by u + t/n.