AR-10 Rifle Owner's Manual. Erik Lawrence

      

      AR-10 Rifle

      Owner’s Manual

      by

      Erik Lawrence

      AR-10 Rifle Owner’s Manual

      By Erik Lawrence

      Copyright ©2015 Erik Lawrence

      All rights reserved.

      No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by an information storage and retrieval system without permission in writing from the publisher. Exceptions to this include reviewers who may quote brief passages in a review to be printed in a magazine, newspaper, or on the Internet.

      ATTENTION US MILITARY UNITS, US GOVERNMENT AGENCIES AND PROFESSIONAL ORGANIZATIONS: Quantity discounts are available on bulk purchases of this book. Special books or book excerpts can also be created to fit specific needs. For information, please contact:

      Vigilant Security Services, LLC®

      P.O. Box 519

      Philippi, WV 26416

       www.vig-sec.com

       [email protected]

      Although the author and publisher have made every effort to ensure the accuracy and completeness of information contained in this book, we assume no responsibility for the use or misuse of information contained in this book .errors, inaccuracies, omissions, or any inconsistency herein. Portions of this manual are excerpts from outside sources but have been validated and modified as necessary.

      Published in eBook format by Erik Lawrence Publications

      Converted by http://www.eBookIt.com

      Ebook Version ISBN-13: 978-1-941998-71-7

      Firearms are potentially dangerous and must be handled responsibly by individuals. The technical information presented in this publication on the use of the weapon system reflects the author’s research, beliefs, and experiences. The information in this book is presented for academic study only. Neither the author nor the publisher assumes any responsibility for the use or misuse of information contained in this book.

      SAFETY NOTICE - Before starting an inspection, ensure the weapon is cleared. Do not manipulate the trigger until the weapon has been cleared of all ammunition. Inspect the chamber to ensure that it is empty and no ammunition is present. Keep the weapon oriented in a safe direction when loading and handling.

      AMMUNITION NOTICE- This weapon fires the 7.62x51mm NATO (.308 Winchester), not the 7.62x54mm. Firing the incorrect ammunition will damage the weapon and possibly injure the operator.

      PROPER TRAINING - Training should be received from knowledgeable and experienced operators on this particular weapons system. Vigilant Security Services, LLC® Training provides this training and continually perfects its instruction with up-to-date information from actual use.

       www.vig-sec.com

WARNING: IT IS YOUR RESPONSIBILITY TO ASSURE THAT YOUR FIREARM IS HANDLED, FIRED, AND STORED SAFELY AND RESPONSIBLY AT ALL TIMES.

      General Information

      The AR-10 type rifle is a lightweight, gas operated, air cooled, magazine fed, semi-automatic rifle.

      AR-10 Rifle Nomenclature – Left Side

1 – Muzzle/Flash Suppressor	9 – Rear Sling Attachment
2 – Front Sight/NVG Mounting Rail	10 – Monopod Mounting Rail
3 – Free-Floating Handguard	11 – Safety/Selector
4 – Optics Mounting Rail	12 – Pistol Grip w/ Palm Shelf
5 – Charging Handle	13 – Trigger
6 – Buffer Extension Tube (under stock)	14 – Bolt Release
7 – Adjustable Cheekrest	15 – Magazine Well
8 – Adjustable Buttstock	16 – Sling Attachment Hole

      AR-10 Rifle Nomenclature – Right Side

      17 – Magazine Release

      Clearing the AR-10

      Figure 1 – Safety/selector lever (on SAFE)

      A.Ensure the rifle is on SAFE, refer to Figure 1. At all-times during the clearing, you must remain aware to not touch the trigger and keep the muzzle pointed in a safe direction. If the safety selector will not rotate to SAFE the hammer may be in the uncocked position, pull the charging handle to the rear and release. Reattempt to place rifle of SAFE.

      Figure 2 – Unlocking the magazine and removing the magazine

      B.Remove the magazine by pressing the magazine catch in on the right side of the receiver/magazine well and pull the magazine downward from the weapon to release it, refer to Figure 2. Place the magazine down or in a pouch.

      Figure 3 – Locking the bolt carrier to the rear

      C.Extract the cartridge (if any) from the chamber. To lock the bolt open, pull the charging handle rearward, press the bottom of the bolt catch, and allow the bolt to move forward until the bolt catch stops it. Return the charging handle forward. Observe the round extracting and ejecting from the ejection port; do not attempt to retain the round, refer to Figure 3.

      Figure 4 – Inspection of the chamber

      D.Visually observe that there is no magazine in the rifle and no round in the chamber; physically check with your finger in low-light conditions as needed, refer to Figure 4.

      NOTE- you must not reverse the steps listed above. If you clear and inspect the chamber prior to removing the magazine you will load another round into the chamber when you release the charging handle. Always check the safety position and remove the magazine prior to clearing the chamber.

      Disassembling the AR-10

      To insure the proper function of the AR-10 it is necessary to disassemble the weapon to inspect and clean the internal components. The names of the parts should be learned through practice in disassembling and reassembling to enhance operator competence. Generally the parts are named for the functions they perform, i.e., the trigger guard guards the trigger, the charging handle is used to charge the weapon, etc. We have broken down the disassembly into normal operator field strip