The Wildlife-friendly Garden. Michael Chinery

Chinery

      The black redstart, uncommon in Britain but a common garden bird on the continent of Europe, regularly breeds in holes and crevices in old walls. Its nest is an untidy and none-too-secure pile of grass, which is lined with hair and feathers.

      Wrens, black redstarts, great tits and pied wagtails are among the many birds that may find your wall to their liking.

      The hedgehog is sure to find a snug retreat among the lower stones. And don’t forget yourself either: it is not difficult to incorporate a smooth stone slab in the wall so that you can sit comfortably and watch your garden guests.

      Water your wall with a slurry of cow or horse dung after building it to encourage invasion by mosses and lichens, which then act as nurseries for ferns and other plants. It will soon become a home for wildlife.

      GARDEN PROJECT – BUILDING A DRY STONE WALL

      If your garden is flat, you can use low stone walls simply as decorative features or to create raised beds. Such beds are ideal for alpines and many other plants and, once built, they make gardening much easier as well! Old bricks can be used instead of stone, but you still do not need mortar. Dig out the wall base to a depth of one brick, making sure that it is fairly level and compacted down.

      To retain a bed, the wall should be double thickness and no higher than four courses. Set each course of bricks on a mixture of sand and peat-free compost. Leave a few gaps between the bricks for lizards and other small creatures to get in, but otherwise the bricks in each course need to be in contact with each other.

      You will not have to wait long for ferns and other plants to spring up naturally in the sand/compost mixture and bind the bricks firmly together, but you can speed things up by planting some yourself. You’ll find that houseleeks and stonecrops do very well on these walls. Remember that this wall is not for walking or climbing on!

       Rolando Ugolini

      This very simple low wall is made of old bricks which are laid double thickness and across each other to bind and strengthen the wall. Leave some small gaps in between.

The garden pond

      If you have room to create only one semi-natural habitat in your garden, then I think it should be a garden pond. This is one of the richest of all habitats in terms of wildlife. As well as providing homes for frogs, newts, dragonflies and many other exciting creatures, it provides food, drink and bathing facilities for birds and assorted mammals. And all will give you, the gardener, a great deal of fun.

      If you are really lucky your garden might already have a stream that you can dam to make a small pond. Local rocks can be used to form the dam, or you can utilize a tree trunk. Oak and elm are good for this as both timbers survive well under water. A height of about 50cm (20in) is fine for the dam. Be sure to consult the appropriate authorities if you want to create a larger pool because anything more than a small dam could interfere with water supplies further downstream.

      Most of us have to create our ponds from scratch, but this is not difficult if there are strong people to do the digging. Pond plants and animals like plenty of sunshine, so don’t site your pond under trees. Apart from creating a lot of shade, they will drop their leaves into the water in the autumn and cause a lot of problems. If you compare a woodland pool with one in the open, you will be in no doubt that the latter is a much richer and more attractive habitat.

       Acres Wild/Ian Smith

      Surrounded by a rich variety of wild and cultivated marginal plants, including yellow irises and brilliant orange primulas, this pond will attract a wide range of insects and other wildlife, and there is enough open water to encourage frogs and dragonflies to come and lay their eggs.

      Constructing the pond

      Ponds dug in low-lying areas where the water table is close to the surface sometimes fill themselves, and you can’t ask for much more natural ponds than these. Otherwise you will have to line your pond.

       Preformed fibreglass liner

      If you decide on a preformed fibreglass liner, all you have to do is to buy one of the shape and size that you want, dig a similarly-shaped hole, and drop the liner into it (see). A morning’s work can give you a very attractive pond!

       Acres Wild

       Acres Wild/Ian Smith

      This cross-section of a pre-formed fibreglass pond shows the correct level for a shelf for marginal plants. The surrounding paving stones must be firmly cemented into place and should overhang the edge sufficiently to conceal the edges of the pond liner. Frogs may shelter under these overhangs, but you need to provide one or more stepping stones so that the animals can get out of the pond.

       Acres Wild/Ian Smith

      1 Mark the position of the pond with pegs and string or a line of sand for irregular shapes.

       Acres Wild/Ian Smith

      2 The excavation must match the profile of the unit. Measure all depths carefully from the rim.

       Acres Wild/Ian Smith

      3 Allow for installation of the pool and back-filling by digging out a larger hole than marked.

       Acres Wild/Ian Smith

      4 After removing all stones, make sure that the ground is compacted down.

       Acres Wild/Ian Smith

      5 Smooth the sides and spread a 5cm (2in) protective layer of sand on the base and sides.

       Acres Wild/Ian Smith

      6 Press the unit gently until level, then part-fill with water and back-fill with sifted soil or sand.

       Flexible liners

      These liners allow you to have a pond of virtually any shape you like. You can use heavy-duty black polythene, but butyl rubber is a better material and, although considerably more expensive, it is likely to last much longer. Whatever you get, make sure it has at least a ten-year guarantee.

       Calculating the liner size

      You can calculate the required liner size by measuring the maximum