A Course in Luminescence Measurements and Analyses for Radiation Dosimetry. Stephen W. S. McKeever

relating to the potential energy in the vicinity of the defect, the wavefunctions for the trapped and delocalized states, the density of states in the delocalized band, and the degree of phonon interaction. For a shallow (hydrogenic) electron trap:

       (2.15)

      where E=hv is the energy of the stimulating light (Blakemore and Rahimi 1984; Landsberg 2003). The coulombic attraction between the freed electron and the ionized defect is ignored when hv is just larger than Eo. The cross-section reaches its maximum at hv=1.4 Eo.

      For deep traps, Lucovsky (1964) approximated the potential in the region of the defect to a delta function and assumed a plane wave excited-state wavefunction to derive:

(2.16)

      The cross-section reaches a maximum at hv=2Eo, and the coulombic field is taken into account.

      A further assumption in the derivation of Equation (2.16) is that the effective mass me* of the electron in the conduction band can be used also for the electron in the localized state. By using the electron rest mass mo instead of me* while the electron is localized, Grimmeis and Ledebo (1975a, 1975b) derived:

(2.17)

      also using a plane-wave final state and the assumption of parabolic bands.

      By taking into account strong phonon coupling between the lattice and the trapped electron, Noras (1980) (see also Chruścińska 2010) derived:

(2.18)

      The parameter ϵ is a dummy variable having the dimensions of energy, and a = 5/2 or 3/2 for forbidden and allowed transitions, respectively. The parameter κ is given by:

       (2.19)

      where again S is the Huang-Rhys factor and hvph is the energy of the phonon vibrational mode.

      For a purely electronic transition (no phonon coupling):

(2.20)

for hv>>Eo, and σp(E)=0 for hv<Eo. Compare Equation 2.20 with Equations 2.16 and 2.17.

      Several other expressions for σp(E) also exist (Jaros 1977; Blakemore and Rahimi 1984; Ridley 1988; Böer 1990; Landsberg 2003).

OSL signals from dosimetry materials originate from the release of electrons from deep trapping states and thus the expressions most frequently used to represent the photoionization cross-section of such centers are Equations 2.16, 2.17, and 2.18. A comparison of the shapes of some of these expressions is given in Figure 2.9.

      Figure 2.009 (a) Examples of postulated photoionization cross-sections as a function of stimulation energy. In this depiction, all curves are normalized to their maximum value and the optical trap depth is Eo = 2.25 eV. (b) Example photoionization cross-sections when phonon coupling is allowed. In this figure, the Huang-Rhys factor S is 10 and the temperature is 300 K. Curves corresponding to two values for Eo are illustrated, each with two curve shapes corresponding to values of hvph of 20 meV (dashed lines) and 40 meV (full lines). (Adapted from Chrus´cin´ska 2010.)

      Exercise 2.2

      From the literature, look up as many expressions as you can find for the photoionization cross-section σp(E). Plot each and compare shapes. Discuss and explain the differences, assumptions, limitations, etc.

      2.2.2 Trapping and Recombination Processes

Once an electron-hole pair has been generated by radiation, trapping and recombination processes remove the free charge carriers (electrons in the conduction band and holes in the valence band) from their respective delocalized bands. Several mechanisms can lead to electron or hole capture and recombination. In principle, direct recombination of a free electron with a free hole (i.e. a transition directly across the gap) is possible, but is highly unlikely. Not only would a large amount of energy have to be dissipated, but conservation of momentum requires that the electron and hole recombine with oppositely directed momenta. If the direct recombination process is non-radiative, the energy would have to be dissipated via phonon vibrations. The materials used for radiation dosimetry are wide-band-gap insulators and the band gaps are several electron-volts wide. (For example, in LiF the band gap it is ~14 eV.) Considering that phonon energies in solids are about 0.03 eV at room temperature, thousands of phonons would be needed to couple with the electron in order to dissipate the energy. In contrast, if the energy was dissipated radiatively in the form of photons, the emitted photon wavelengths (using LiF as an example) would be around 80–90 nm, in contrast to the visible wavelengths observed in luminescence measurements. These considerations lead to the conclusion that recombination of charges occurs via localized states in a process known as Shockley-Read-Hall (SRH) recombination. The recombination process leaves the recombination site (defect) in an excited state, radiative relaxation of which produces the luminescence.

      Considering only the recombination of free electrons with trapped holes, the rate of SRH recombination can be seen to be dependent on the free electron density, the density of trapped holes, and the temperature. The free carrier lifetime τ of an electron or a hole can be expressed as: