Surface Displacement Measurement from Remote Sensing Images. Olivier Cavalie

Читать онлайн.
Название Surface Displacement Measurement from Remote Sensing Images
Автор произведения Olivier Cavalie
Жанр География
Серия
Издательство География
Год выпуска 0
isbn 9781119986836



Скачать книгу

available at no charge for all users. The satellite was still active in 2020.

       – Ikonos: Ikonos was a breakthrough among the commercial satellites. The whole platform is used to point towards a geographical region. The whole satellite is agile and, consequently, the satellite weight is reduced. Commercial images with submetric resolution are available. The dynamic range of images is increased.

       – Quickbird-2: Quickbird-2 features enhanced commercial spatial resolution. It is the highest-resolution commercial satellite to date.

       – SPOT-5: Third-generation satellite of the SPOT family operated by Spot Image. It takes 2.5 m panchromatic images and 10 m multispectral ones. Pointing is done with steering mirrors. The HRS instrument is composed of two telescopes pointing around 20° forward and backward. The HRS takes native stereoscopic images with a resolution of 5 m (along track) × 10 m (across track).

       – Formosat-2: This satellite has a daily revisit for event/disaster monitoring, thanks to a body-pointing capability of ±45° in roll and pitch.

      1.4.2. On-going optical missions

      During the last 15 years, the main drivers were increases in the spatial resolution and the revisit time. This is conducive to the conception of constellations of agile satellites (simpler, if possible, and smaller). It is possible to observe several evolution patterns for optical satellite missions:

       – agility is often the reference: it simplifies the instrument and reduces use of steering mirrors;

       – operators reduce the satellite altitude in order to find a compromise between smaller aperture and better spatial resolution. Examples: Cartosat-2C and Cartosat-3A;

       – a large aperture is chosen to optimize the resolution. Examples: WorldView-3 and Gaofen-8;

       – satellite constellations are increasingly proposed: this decreases the weight of the satellite, the payload and platform complexity and the satellite unitary cost, while increasing the number of satellites (constellation) and improving the revisit time. Constellations of high-resolution satellites are used to retrieve change detection information, geo-statistics, etc. Examples: SkySat, SuperView and RapidEye;

       – usually, a focal plane is composed of several time delay integration (TDI) image sensors, mounted in staggered configuration. CCD sensors are used where ultralow noise is preferred. However, CMOS detectors with low power, high frame rate and low cost are also used. The use of matrix detectors (CCD or CMOS) adds video mode functions into the satellites. Examples: Zhuhai and BlackSky constellations.

      In the following, some missions with a specific interest for DEM computation or displacement measurement are presented:

       – Asnaro: The overall aim of this project is to develop a new generation of mini-satellite buses with high-performance characteristics. It is based on open-architecture techniques and manufacturing methodologies to reduce the cost and development period.

       – Carbonite-2: This satellite is a technology demonstration of low-cost video-from-orbit with commercial off-the-shelf (COTS) technologies. At only 100 kg, it delivers 1 m ground sample distance (GSD) images. The swath width is very limited.

Satellite Nation No. of satellites Altitude (km) Local time Period of orbit (min) Inclination (deg) Weight (kg)
Alos Japan 1 692 10:30 - 98.2 4,000
Alsat-1B Algeria 1 700 10:30 98.5 98 103
Alsat-2A/2B Algeria 2 637 10:30 - - 130
Asnaro Japan 1 504 11:00 - 97.42 495
BKA (Belka-2) Belarus 1 505 - - 97.49 473
BlackSky constellation USA 20 500 10:30 - 53 56
Carbonite-2 UK 1 505 10:30 94.6 97.5 100
Cartosat-1 (IRS-P5) India 1 618 10:15 - 97.87 680
Cartosat-2A/2B India 2 635 9:32 75 90