Applied Colloid and Surface Chemistry. Richard M. Pashley

to the very theoretical, and less mathematical students may wish to skip some of the more involved derivations. However, they should be able to do this and still maintain a good basic understanding of the fundamental principles involved. It should be remembered that a thorough knowledge of theory can act as a barrier to progress, through the inhibition of further investigation. Students asking ignorant but intelligent questions can often stimulate valuable new research areas.

      The book contains some recommended experiments, which we have found to work well and stimulate students to consider both the fundamental theory and industrial applications. Sample questions have also been included in some sections, with detailed answers available on our web site.

Although the text has been primarily aimed at students, researchers in cognate areas may also find some of the topics stimulating. A reasonable background in chemistry or physics is all that is required.

      We also would like to gratefully acknowledge important contributions from several students, including John Antony and Mojtaba Taseidifar (for Chapter 3) and Mathew Francis and Rui Wei (for Chapter 11).

      Richard M. Pashley

      Marilyn E. Karaman

      October 2020

      About the Companion Website

      This book is accompanied by a companion website.

      www.wiley.com/go/pashley/appliedcolloid2e

      This website includes:

       Powerpoint slides of Figures from the book

1 Introduction

      Introduction to the nature of colloids and the linkage between colloids and surface properties. The importance of size and surface area. Introduction to wetting and the industrial importance of particle size and surface modifications.

INTRODUCTION TO THE NATURE OF COLLOIDAL SOLUTIONS

      The difference between macroscopic and microscopic objects is clear from everyday experience. For example, a glass marble will sink rapidly in water; however, if we grind it into sub‐micron‐sized particles, these will float or disperse freely in water, producing a visibly cloudy ‘solution’, which can remain stable for hours or days. In this process we have, in fact, produced a ‘colloidal’ dispersion or solution. This dispersion of one (finely divided or microscopic) phase in another is quite different to the molecular mixtures or ‘true’ solutions formed when we dissolve ethanol or common salt in water. Microscopic particles of one phase dispersed in another are generally called colloidal solutions or dispersions. Both nature and industry have found many uses for this type of solution. We will see later that the properties of colloidal solutions are intimately linked to the high surface area of the dispersed phase, as well as to the chemical nature of the particle’s surface.

      Historical note: The term ‘colloid’ is derived from the Greek word for glue, ‘kolla’. It was originally used for gelatinous polymer colloids, which were identified by Thomas Graham in 1860 in experiments on osmosis and diffusion.

      It turns out to be very useful to dissolve (or more strictly disperse) solids, such as minerals and metals, in water. But how does it happen? We can see why from simple physics. Three fundamental forces operate on fine particles in solution:

      1 A gravitational force, tending to settle or raise particles depending on their density relative to the solvent.

      2 A viscous drag force, which arises as a resistance to motion, since the fluid has to be forced apart as the particle moves through it.

      3 The ‘natural’ kinetic energy of particles and molecules, which causes random Brownian motion.

      If we consider the first two non‐random forces, we can easily calculate the terminal or limiting velocity, V, (for settling or rising, depending on the particle’s density relative to, say, water) of a spherical particle of radius r. Under these conditions, the viscous drag force must equal the gravitational force. Thus, at a settling velocity, V, the viscous drag force is given by: F_drag = 6πrVη = 4πr³g(ρ_p − ρ_w)/3 = F_gravity, the gravitational force, where η is the viscosity of water and the density difference between particle and water is (ρ_p − ρ_w). Hence, if we assume a particle‐water density difference of +1 g cm^‐3, we obtain the results:

r/Å	100	1000	10,000	105	106
r/μm	0.01	0.1	1	10	100
V/cm/sec	2 × 10−8	2 × 10−6	2 ×10‐4	2 × 10−2	2

      Clearly, from factors (1) and (2), small particles will take a very long time to settle, and so a fine dispersion will be stable almost indefinitely, even for materials denser than water. But what of factor (3)? Each particle, independent of size, will have a kinetic energy, on average, of around 1 kT. So the typical random speed (ν) of a particle (in any direction) will be roughly given by:

      Again, if we assume that ρ_p = 2 g cm⁻³, then we obtain the results:

r/Å	100	1000	10,000	105	106
r/μm	0.01	0.1	1	10	100
ν/cm/sec	102	3	0.1	3 × 10−3	1 × 10‐4

      These values suggest that kinetic random motion will dominate the behaviour of small particles, which will not settle, and the dispersion will be completely stable. However, this point is really the beginning of ‘colloid science’. Since these small particles have this kinetic energy they will, of course, collide with other particles in the dispersion, with collision energies ranging up to at least 10 kT (since there will actually be a distribution of kinetic energies). If there are attractive forces between the particles – as is reasonable since most colloids were initially formed via a vigorous mechanical process of disruption of a macroscopic or large