Техническая литература
Различные книги в жанре Техническая литератураClick Chemistry for Biotechnology and Materials Science
Mimicking natural biochemical processes, click chemistry is a modular approach to organic synthesis, joining together small chemical units quickly, efficiently and predictably. In contrast to complex traditional synthesis, click reactions offer high selectivity and yields, near-perfect reliability and exceptional tolerance towards a wide range of functional groups and reaction conditions. These ‘spring loaded’ reactions are achieved by using a high thermodynamic driving force, and are attracting tremendous attention throughout the chemical community. Originally introduced with the focus on drug discovery, the concept has been successfully applied to materials science, polymer chemistry and biotechnology. The first book to consider this topic, Click Chemistry for Biotechnology and Materials Science examines the fundamentals of click chemistry, its application to the precise design and synthesis of macromolecules, and its numerous applications in materials science and biotechnology. The book surveys the current research, discusses emerging trends and future applications, and provides an important nucleation point for research. Edited by one of the top 100 young innovators with the greatest potential to have an impact on technology in the 21st century according to Technology Review and with contributions from pioneers in the field, Click Chemistry for Biotechnology and Materials Science provides an ideal reference for anyone wanting to learn more about click reactions.
CVD Diamond for Electronic Devices and Sensors
Synthetic diamond is diamond produced by using chemical or physical processes. Like naturally occurring diamond it is composed of a three-dimensional carbon crystal. Due to its extreme physical properties, synthetic diamond is used in many industrial applications, such as drill bits and scratch-proof coatings, and has the potential to be used in many new application areas A brand new title from the respected Wiley Materials for Electronic and Optoelectronic Applications series, this title is the most up-to-date resource for diamond specialists. Beginning with an introduction to the properties of diamond, defects, impurities and the growth of CVD diamond with its imminent commercial impact, the remainder of the book comprises six sections: introduction, radiation sensors, active electronic devices, biosensors, MEMs and electrochemistry. Subsequent chapters cover the diverse areas in which diamond applications are having an impact including electronics, sensors and actuators and medicine.
Design of Ultra Wideband Power Transfer Networks
Combining analytic theory and modern computer-aided design techniques this volume will enable you to understand and design power transfer networks and amplifiers in next generation radio frequency (RF) and microwave communication systems. A comprehensive theory of circuits constructed with lumped and distributed elements is covered, as are electromagnetic field theory, filter theory, and broadband matching. Along with detailed roadmaps and accessible algorithms, this book provides up-to-date, practical design examples including: filters built with microstrip lines in C and X bands; various antenna matching networks over HF and microwave frequencies; channel equalizers with arbitary gain shapes; matching networks for ultrasonic transducers; ultra wideband microwave amplifiers constructed with lumped and distributed elements. A companion website details all Real Frequency Techniques (including line segment and computational techniques) with design tools developed on MatLab. Essential reading for all RF and circuit design engineers, this is also a great reference text for other electrical engineers and researchers working on the development of communications applications at wideband frequencies. This book is also beneficial to advanced electrical and communications engineering students taking courses in RF and microwave communications technology. www.wiley.com/go/yarman_wideband
Environmentally Friendly Production of Pulp and Paper
Implementing Cleaner Production in the pulp and paper industry The large—and still growing—pulp and paper industry is a capital- and resource-intensive industry that contributes to many environmental problems, including global warming, human toxicity, ecotoxicity, photochemical oxidation, acidification, nutrification, and solid wastes. This important reference for professionals in the pulp and paper industry details how to improve manufacturing processes that not only cut down on the emission of pollutants but also increase productivity and decrease costs. Environmentally Friendly Production of Pulp and Paper guides professionals in the pulp and paper industry to implement the internationally recognized process of Cleaner Production (CP). It provides updated information on CP measures in: Raw material storage and preparation Pulping processes (Kraft, Sulphite, and Mechanical) Bleaching, recovery, and papermaking Emission treatment and recycled fiber processing In addition, the book includes a discussion on recent cleaner technologies and their implementation status and benefits in the pulp and paper industry. Covering every aspect of pulping and papermaking essential to the subject of reducing pollution, this is a must-have for paper and bioprocess engineers, environmental engineers, and corporations in the forest products industry.
A Concise Introduction to Additives for Thermoplastic Polymers
Describes twenty-one of the most important and commonly used additives A Concise Introduction to Additives for Thermoplastic Polymers focuses on additives for thermoplastic polymers and describes 21 of the most important and commonly used additives from Plasticizers and Fillers to Optical Brighteners and Anti-Microbial additives. It also includes chapters on safety and hazards, and prediction of service time models. While there are many exhaustive and complex books dealing with additives for polymers, the size of them deter students and many industry engineers from using them. The purpose of this book, therefore, is to fill this void and present a concise introduction to this important subject. Written in an accessible and practical style, the author introduces the reader to the complex subject of plastics additives in an engaging manner. His ability to be concise is the result of his teaching courses on the subject and using his own lecture notes for material. This book comprises the author's course notes so that a larger public can benefit from his knowledge. A Concise Introduction to Additives for Thermoplastic Polymers is the ideal primer for students who will later work in polymer science or the development of plastics formulation, as well as industry engineers and specialists who want to have a deeper knowledge of the plastics industry.
Verification, Validation, and Testing of Engineered Systems
Systems' Verification Validation and Testing (VVT) are carried out throughout systems' lifetimes. Notably, quality-cost expended on performing VVT activities and correcting system defects consumes about half of the overall engineering cost. Verification, Validation and Testing of Engineered Systems provides a comprehensive compendium of VVT activities and corresponding VVT methods for implementation throughout the entire lifecycle of an engineered system. In addition, the book strives to alleviate the fundamental testing conundrum, namely: What should be tested? How should one test? When should one test? And, when should one stop testing? In other words, how should one select a VVT strategy and how it be optimized? The book is organized in three parts: The first part provides introductory material about systems and VVT concepts. This part presents a comprehensive explanation of the role of VVT in the process of engineered systems (Chapter-1). The second part describes 40 systems' development VVT activities (Chapter-2) and 27 systems' post-development activities (Chapter-3). Corresponding to these activities, this part also describes 17 non-testing systems' VVT methods (Chapter-4) and 33 testing systems' methods (Chapter-5). The third part of the book describes ways to model systems’ quality cost, time and risk (Chapter-6), as well as ways to acquire quality data and optimize the VVT strategy in the face of funding, time and other resource limitations as well as different business objectives (Chapter-7). Finally, this part describes the methodology used to validate the quality model along with a case study describing a system’s quality improvements (Chapter-8). Fundamentally, this book is written with two categories of audience in mind. The first category is composed of VVT practitioners, including Systems, Test, Production and Maintenance engineers as well as first and second line managers. The second category is composed of students and faculties of Systems, Electrical, Aerospace, Mechanical and Industrial Engineering schools. This book may be fully covered in two to three graduate level semesters; although parts of the book may be covered in one semester. University instructors will most likely use the book to provide engineering students with knowledge about VVT, as well as to give students an introduction to formal modeling and optimization of VVT strategy.
Wind Power. Turbine Design, Selection, and Optimization
An up-to-date and thorough treatment of the technologies, practical applications, and future of wind power, with the pros and cons and technical intricacies of various types of wind turbines and wind power prediction With the demand for energy outstripping availability from conventional sources such as fossil fuels, new sources of energy must be found. Wind power is the most mature of all of the renewable or alternative sources of energy being widely used today. With many old wind turbines becoming obsolete or in need of replacement, new methods and materials for building turbines are constantly being sought after, and troubleshooting, from an engineering perspective, is paramount to the operational efficiency of turbines currently in use. Wind Power: Turbine Design, Selection, and Optimization: Details the technical attributes of various types of wind turbines, including new collinear windmills, orthogonal windmills, non-vibration VAWT wind turbines, and others Covers all the updated protocols for wind power and its applications Offers a thorough explanation of the current and future state of wind power Is suitable not only as a reference for the engineer working with wind power but as a textbook for graduate students, postdoctoral students, and researchers Wind power is one of the fastest-growing, oldest, and «greenest» of the major sources of renewable energy that has been developed, with more efficient and cost-effective technologies and materials now constantly being sought for turbines and the equipment used with them. Here is a comprehensive and thorough review of the engineering pros and cons of using different kinds of wind turbines in different environments, including offshore. With full technical knowledge, engineers, managers, and other decision-makers in the wind energy industry can make more informed decisions about increasing capacity, cost-efficiency, and equipment longevity. Covering the various types of wind turbines available, such as new collinear windmills, orthogonal turbines, and others, this highly technical treatment of wind turbines offers engineers, students, and researchers insight into the practical applications of these turbines and their potential for maximum efficiency.
Acoustical Imaging. Techniques and Applications for Engineers
The technology of acoustical imaging has advanced rapidly over the last sixty years, and now represents a sophisticated technique applied to a wide range of fields including non-destructive testing, medical imaging, underwater imaging and SONAR, and geophysical exploration. Acoustical Imaging: Techniques and Applications for Engineers introduces the basic physics of acoustics and acoustical imaging, before progressing to more advanced topics such as 3D and 4D imaging, elasticity theory, gauge invariance property of acoustic equation of motion and acoustic metamaterials. The author draws together the different technologies in sonar, seismic and ultrasound imaging, highlighting the similarities between topic areas and their common underlying theory. Key features: Comprehensively covers all of the important applications of acoustical imaging. Introduces the gauge invariance property of acoustic equation of motion, with applications in the elastic constants of isotropic solids, time reversal acoustics, negative refraction, double negative acoustical metamaterial and acoustical cloaking. Contains up to date treatments on latest theories of sound propagation in random media, including statistical treatment and chaos theory. Includes a chapter devoted to new acoustics based on metamaterials, a field founded by the author, including a new theory of elasticity and new theory of sound propagation in solids and fluids and tremendous potential in several novel applications. Covers the hot topics on acoustical imaging including time reversal acoustics, negative refraction and acoustical cloaking. Acoustical Imaging: Techniques and Applications for Engineers is a comprehensive reference on acoustical imaging and forms a valuable resource for engineers, researchers, senior undergraduate and graduate students.
Graphene Optoelectronics. Synthesis, Characterization, Properties, and Applications
This first book on emerging applications for this innovative material gives an up-to-date account of the many opportunities graphene offers high-end optoelectronics. The text focuses on potential as well as already realized applications, discussing metallic and passive components, such as transparent conductors and smart windows, as well as high-frequency devices, spintronics, photonics, and terahertz devices. Also included are sections on the fundamental properties, synthesis, and characterization of graphene. With its unique coverage, this book will be welcomed by materials scientists, solid-state chemists and solid-state physicists alike.
Risk Analysis. Socio-technical and Industrial Systems
An overview of the methods used for risk analysis in a variety of industrial sectors, with a particular focus on the consideration of human aspects, this book provides a definition of all the fundamental notions associated with risks and risk management, as well as clearly placing the discipline of risk analysis within the broader context of risk management processes. The author begins by presenting a certain number of basic concepts, followed by the general principle of risk analysis. He then moves on to examine the ISO31000 standard, which provides a specification for the implementation of a risk management approach. The ability to represent the information we use is crucial, so the representation of knowledge, covering both information concerning the risk occurrence mechanism and details of the system under scrutiny, is also considered. The different analysis methods are then presented, firstly for the identification of risks, then for their analysis in terms of cause and effect, and finally for the implementation of safety measures. Concrete examples are given throughout the book and the methodology and method can be applied to various fields (industry, health, organization, technical systems). Contents Part 1. General Concepts and Principles 1. Introduction. 2. Basic Notions. 3. Principles of Risk Analysis Methods. 4. The Risk Management Process (ISO31000). Part 2. Knowledge Representation 5. Modeling Risk. 6. Measuring the Importance of a Risk. 7. Modeling of Systems for Risk Analysis. Part 3. Risk Analysis Method 8. Preliminary Hazard Analysis. 9. Failure Mode and Effects Analysis. 10. Deviation Analysis Using the HAZOP Method. 11. The Systemic and Organized Risk Analysis Method. 12. Fault Tree Analysis. 13. Event Tree and Bow-Tie Diagram Analysis. 14. Human Reliability Analysis. 15. Barrier Analysis and Layer of Protection Analysis. Part 4. Appendices Appendix 1. Occupational Hazard Checklists. Appendix 2. Causal Tree Analysis. Appendix 3. A Few Reminders on the Theory of Probability. Appendix 4. Useful Notions in Reliability Theory. Appendix 5. Data Sources for Reliability. Appendix 6. A Few Approaches for System Modelling. Appendix 7. CaseStudy: Chemical Process. Appendix 8. XRisk Software. About the Authors Jean-Marie Flaus is Professor at Joseph Fourier University in Grenoble, France.