Техническая литература
Различные книги в жанре Техническая литератураErosion of Geomaterials
This book aims to deliver significant scientific progress on the problem of the erosion of geomaterials, focusing on the mechanical/physical aspect. The chapters oscillate between a phenomenological outlook that is well grounded in experiments, and an approach that can offer a modeling framework. The basic mechanisms of internal and surface erosion are tackled one-by-one: filtration, suffusion, contact erosion, concentrated leak erosion, sediment and wind transport, bedload transport. These erosion mechanisms comprise both hydraulic structures (dams, dikes) and natural environments (wind, river, coastal). In this book, physicists and mechanicians share with the reader their most recent findings in their field work and study, while at the same time maintaining an accessible format. This compendium provides a well-documented information resource, and above all, a tool for approaching the issue of erosion of geomaterials in an up-to-date fashion for students, researchers and practitioners alike.
Chemistry in Microelectronics
Microelectronics is a complex world where many sciences need to collaborate to create nano-objects: we need expertise in electronics, microelectronics, physics, optics and mechanics also crossing into chemistry, electrochemistry, as well as biology, biochemistry and medicine. Chemistry is involved in many fields from materials, chemicals, gases, liquids or salts, the basics of reactions and equilibrium, to the optimized cleaning of surfaces and selective etching of specific layers. In addition, over recent decades, the size of the transistors has been drastically reduced while the functionality of circuits has increased. This book consists of five chapters covering the chemicals and sequences used in processing, from cleaning to etching, the role and impact of their purity, along with the materials used in “Front End Of the Line” which corresponds to the heart and performance of individual transistors, then moving on to the “Back End Of the Line” which is related to the interconnection of all the transistors. Finally, the need for specific functionalization also requires key knowledge on surface treatments and chemical management to allow new applications. Contents 1. Chemistry in the “Front End of the Line” (FEOL): Deposits, Gate Stacks, Epitaxy and Contacts, François Martin, Jean-Michel Hartmann, Véronique Carron and Yannick Le Tiec. 2. Chemistry in Interconnects, Vincent Jousseaume, Paul-Henri Haumesser, Carole Pernel, Jeffery Butterbaugh, Sylvain Maîtrejean and Didier Louis. 3. The Chemistry of Wet Surface Preparation: Cleaning, Etching and Drying, Yannick Le Tiec and Martin Knotter. 4. The Use and Management of Chemical Fluids in Microelectronics, Christiane Gottschalk, Kevin Mclaughlin, Julie Cren, Catherine Peyne and Patrick Valenti. 5. Surface Functionalization for Micro- and Nanosystems: Application to Biosensors, Antoine Hoang, Gilles Marchand, Guillaume Nonglaton, Isabelle Texier-Nogues and Francoise Vinet. About the Authors Yannick Le Tiec is a technical expert at CEA-Leti, Minatec since 2002. He is a CEA-Leti assignee at IBM, Albany (NY) to develop the advanced 14 nm CMOS node and the FDSOI technology. He held different technical positions from the advanced 300 mm SOI CMOS pilot line to different assignments within SOITEC for advanced wafer development and later within INES to optimize solar cell ramp-up and yield. He has been part of the ITRS Front End technical working group at ITRS since 2008.
Mechanical Engineering Education
Mechanical Engineering is defined nowadays as a discipline “which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems”. Recently, mechanical engineering has also focused on some cutting-edge subjects such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, as well as aspects related to sustainable mechanical engineering. This book covers mechanical engineering higher education with a particular emphasis on quality assurance and the improvement of academic institutions, mechatronics education and the transfer of knowledge between university and industry.
Mobile Networks Architecture
This book explains the evolutions of architecture for mobiles and summarizes the different technologies: – 2G: the GSM (Global System for Mobile) network, the GPRS (General Packet Radio Service) network and the EDGE (Enhanced Data for Global Evolution) evolution; – 3G: the UMTS (Universal Mobile Telecommunications System) network and the HSPA (High Speed Packet Access) evolutions: – HSDPA (High Speed Downlink Packet Access), – HSUPA (High Speed Uplink Packet Access), – HSPA+; – 4G: the EPS (Evolved Packet System) network. The telephone service and data transmission are the two main services provided by these networks. The evolutions are fundamentally dictated by the increase in the rate of data transmission across the radio interface between the network and mobiles. This book is intended as a readily understandable support to help students and professionals wishing to quickly acquire the main concepts of networks for mobiles understand the technologies deployed.
Laser in Manufacturing
Generally a laser (light amplification by stimulated emission of radiation) is defined as “a device which uses a quantum mechanical effect, stimulated emission, to generate a coherent beam of light from a lasing medium of controlled purity, size, and shape”. Laser material processing represents a great number of methods, which are rapidly growing in current and different industrial applications as new alternatives to traditional manufacturing processes. Nowadays, the use of lasers in manufacturing is an emerging area with a wide variety of applications, for example, in electronics, molds and dies, and biomedical applications. The purpose of this book is to present a collection of examples illustrating the state of the art and research developments to lasers in manufacturing, covering laser rapid manufacturing, lasers in metal forming applications, laser forming of metal foams, mathematical modeling of laser drilling, thermal stress analysis, modeling and simulation of laser welding, and the use of lasers in surface engineering. This book can be used as a research book for a final undergraduate engineering course or as a subject on lasers in manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, laser researchers, mechanical, manufacturing, materials or physics engineers, or professionals in any related modern manufacturing technology. Contents 1. Laser Rapid Manufacturing: Technology, Applications, Modeling and Future Prospects, Christ P. Paul, Pankaj Bhargava, Atul Kumar, Ayukt K. Pathak and Lalit M. Kukreja. 2. Lasers in Metal Forming Applications, Stephen A. Akinlabi, Mukul Shukla, Esther T. Akinlabi and Tshilidzi Marwala. 3. Laser Forming of Metal Foams, Fabrizio Quadrini, Denise Bellisario, Erica A. Squeo and Loredana Santo. 4. Mathematical Modeling of Laser Drilling, Maturose Suchatawat and Mohammad Sheikh. 5. Laser Cutting a Small Diameter Hole: Thermal Stress Analysis, Bekir S. Yilbas, Syed S. Akhtar and Omer Keles. 6. Modeling and Simulation of Laser Welding, Karuppudaiyar R. Balasabramanian, Krishnasamy Sankaranarayanasamy and Gangusami N. Buvanashekaran. 7. Lasers in Surface Engineering, Alberto H. Garrido, Rubén González, Modesto Cadenas, Chin-Pei Wang and Farshid Sadeghi.
Reconstructing Project Management
This hugely informative and wide-ranging analysis on the management of projects, past, present and future, is written both for practitioners and scholars. Beginning with a history of the discipline’s development, Reconstructing Project Management provides an extensive commentary on its practices and theoretical underpinnings, and concludes with proposals to improve its relevancy and value. Written not without a hint of attitude, this is by no means simply another project management textbook. The thesis of the book is that ‘it all depends on how you define the subject’; that much of our present thinking about project management as traditionally defined is sometimes boring, conceptually weak, and of limited application, whereas in reality it can be exciting, challenging and enormously important. The book draws on leading scholarship and case studies to explore this thesis. The book is divided into three major parts. Following an Introduction setting the scene, Part 1 covers the origins of modern project management – how the discipline has come to be what it is typically said to be; how it has been constructed – and the limitations of this traditional model. Part 2 presents an enlarged view of the discipline and then deconstructs this into its principal elements. Part 3 then reconstructs these elements to address the challenges facing society, and the implications for the discipline, in the years ahead. A final section reprises the sweep of the discipline’s development and summarises the principal insights from the book. This thoughtful commentary on project (and program, and portfolio) management as it has developed and has been practiced over the last 60-plus years, and as it may be over the next 20 to 40, draws on examples from many industry sectors around the world. It is a seminal work, required reading for everyone interested in projects and their management.
Sustainable Dairy Production
This book offers a comprehensive overview of the state of the art in sustainable dairy production, helping the industry to develop more sustainable dairy products, through new technologies, implementing life cycle analysis, and upgrading and optimization of their current production lines. It aims to stimulate process innovations, taking into account environmental, economic and public relations benefits for companies. Topics covered include: How to set up a sustainable production line How to quantify the carbon foot print of a dairy product by using life cycle analysis Current technologies to improve the carbon foot print What measures can be taken to reduce the global warming potential of the farm Reduction of water use in dairy production Marketing sustainable dairy products Bench marking of dairy products against other food products Potential future technological developments to improve the carbon foot print for the following decades
RSMeans Cost Data
RSMeans Cost Data, Student Edition provides a thorough introduction to cost estimating in a self-contained print and online package. With clear explanations and a hands-on, example-driven approach, it is the ideal reference for students and new professionals who need to learn how to perform cost estimating for building construction. Features include: Commercial and residential construction cost data in print and online formats Complete how-to guidance on the essentials of cost estimating A supplemental website with plans, specifications, problem sets, and a full sample estimate With more than 930 Location Factors in the United States and Canada, the data includes up-to-date system prices for more than 100 standard assemblies and in-place costs for thousands of alternates—making it easy to customize budget estimates and compare system costs. UNIT PRICES (organized in MasterFormat 2010) 1 General Requirements 2 Existing Conditions 3 Concrete 4 Masonry 5 Metals 6 Woods, Plastics & Composites 7 Thermal & Moisture Protection 8 Openings 9 Finishes 10 Specialties 11 Equipment 12 Furnishings 13 Special Construction 14 Conveying Equipment 21 Fire Suppression 22 Plumbing 23 Heating, Ventilating & Air Conditioning 26 Electrical 27 Communications 28 Electronic Safety & Security 31 Earthwork 32 Exterior Improvements 33 Utilities ASSEMBLIES A Substructure B Shell C Interiors D Services E Equipment & Furnishings F Special Construction G Building Site Work REFERENCE INFORMATION Equipment Rental Costs Crews Cost Indexes Reference Tables Square Foot Costs
Practical Tunnel Construction
The only modern guide to all aspects of practical tunnel construction Practical Tunnel Construction fills a void in the literature for a practical guide to tunnel construction. By taking the reader through a brief introduction and history to a comprehensive discussion of how the geological factors affect tunneling, the author covers the stages and technology that are common today without using complex equations. Written for the individual who does not have an extensive background in tunneling but who has to make tunneling decisions, the various tunneling methods are discussed to help in the determination of the appropriate method. The methods discussed are: hand mining, drill/blast, Tunnel Boring Machine (TBM), New Austrian Tunnelling Method (NATM), Norwegian Method of Tunnelling (NMT), Roadheader, Earth Pressure Balance Machine (EPBM), and Slurry Pressure Balance Machine (SPBM). This book focuses on driven tunnels. This versatile handbook: Offers clear and accessible coverage of the state of the art in tunnel construction Introduces the essentials of design and construction of many types of tunnels, including TBM, EPB, Roadheader, NATM, drill and blast, and soft ground tunneling Provides nontechnical guidance on selecting the most appropriate tunneling methods for various situations Includes a brief history of tunneling and an introduction to geotechnical considerations Discusses tunnel access shaft construction, mucking methods, tunnel haulage, grout, water handling, and much more Practical Tunnel Construction is an important resource for students, construction managers, tunnel designers, municipal engineers, or engineers who are employed by government agencies or corporations that are exploring the feasibility of planning and designing or building a tunnel.
RF Circuit Design
Summarizes the schemes and technologies in RF circuit design, describes the basic parameters of an RF system and the fundamentals of RF system design, and presents an introduction of the individual RF circuit block design. Forming the backbone of today's mobile and satellite communications networks, radio frequency (RF) components and circuits are incorporated into everything that transmits or receives a radio wave, such as mobile phones, radio, WiFi, and walkie talkies. RF Circuit Design, Second Edition immerses practicing and aspiring industry professionals in the complex world of RF design. Completely restructured and reorganized with new content, end-of-chapter exercises, illustrations, and an appendix, the book presents integral information in three complete sections: Part One explains the different methodologies between RF and digital circuit design and covers voltage and power transportation, impedance matching in narrow-band case and wide-band case, gain of a raw device, measurement, and grounding. It also goes over equipotentiality and current coupling on ground surface, as well as layout and packaging, manufacturability of product design, and radio frequency integrated circuit (RFIC). Part Two includes content on the main parameters and system analysis in RF circuit design, the fundamentals of differential pair and common-mode rejection ratio (CMRR), Balun, and system-on-a-chip (SOC). Part Three covers low-noise amplifier (LNA), power amplifier (PA), voltage-controlled oscillator (VCO), mixers, and tunable filters. RF Circuit Design, Second Edition is an ideal book for engineers and managers who work in RF circuit design and for courses in electrical or electronic engineering.