Техническая литература
Различные книги в жанре Техническая литератураPost-Disaster Reconstruction of the Built Environment. Rebuilding for Resilience
Disasters threaten all parts of the world and they appear to be increasing in frequency, scale and intensity. Despite huge improvements in the emergency response, permanent reconstruction is often uncoordinated, inefficiently managed and slow to begin. International agencies are geared to an efficient response in terms of humanitarian relief, but they are not well versed in the requirements of long-term reconstruction, which is often constrained by lack of planning and poorly coordinated management. The construction industry is typically engaged in a range of critical activities after a disaster, including provision of temporary shelter in the immediate aftermath and restoration of permanent shelter and public infrastructure once the immediate humanitarian needs have been attended to. Post-Disaster Reconstruction of the Built Environment identifies the challenges that face the industry and highlights best practice to enable the construction industry to address those problems which make an effective response to these unexpected events difficult. Written by an international team of experts, this book will help researchers and advanced students of construction understand the problems faced by communities and the construction industry when faced with a natural or man-made disaster, and identify the planning and management processes required by the industry to mount an effective response.
Predictive Control of Power Converters and Electrical Drives
Describes the general principles and current research into Model Predictive Control (MPC); the most up-to-date control method for power converters and drives The book starts with an introduction to the subject before the first chapter on classical control methods for power converters and drives. This covers classical converter control methods and classical electrical drives control methods. The next chapter on Model predictive control first looks at predictive control methods for power converters and drives and presents the basic principles of MPC. It then looks at MPC for power electronics and drives. The third chapter is on predictive control applied to power converters. It discusses: control of a three-phase inverter; control of a neutral point clamped inverter; control of an active front end rectifier, and; control of a matrix converter. In the middle of the book there is Chapter four – Predictive control applied to motor drives. This section analyses predictive torque control of industrial machines and predictive control of permanent magnet synchronous motors. Design and implementation issues of model predictive control is the subject of the final chapter. The following topics are described in detail: cost function selection; weighting factors design; delay compensation; effect of model errors, and prediction of future references. While there are hundreds of books teaching control of electrical energy using pulse width modulation, this will be the very first book published in this new topic. Unique in presenting a completely new theoretic solution to control electric power in a simple way Discusses the application of predictive control in motor drives, with several examples and case studies Matlab is included on a complementary website so the reader can run their own simulations
Error Control Coding for B3G/4G Wireless Systems. Paving the Way to IMT-Advanced Standards
Covering the fast evolving area of advanced coding, Error Control Coding for B3G/4G Wireless Systems targets IMT-Advanced systems to present the latest findings and implementation solutions. The book begins by detailing the fundamentals of advanced coding techniques such as Coding, Decoding, Design, and Optimization. It provides not only state-of-the-art research findings in 3D Turbo-codes, non-binary LDPC Codes, Fountain, and Raptor codes, but also insights into their real-world implementation by examining hardware architecture solutions, for example VLSI complexity, FPGA, and ASIC. Furthermore, special attention is paid to Incremental redundancy techniques, which constitute a key feature of Wireless Systems. A promising application of these advanced coding techniques, the Turbo-principle (also known as iterative processing), is illustrated through an in-depth discussion of Turbo-MIMO, Turbo-Equalization, and Turbo-Interleaving techniques. Finally, the book presents the status of major standardization activities currently implementing such techniques, with special interest in 3GPP UMTS, LTE, WiMAX, IEEE 802.11n, DVB-RCS, DVB-S2, and IEEE 802.22. As a result, the book coherently brings together academic and industry vision by providing readers with a uniquely comprehensive view of the whole topic, whilst also giving an understanding of leading-edge techniques. Includes detailed coverage of coding, decoding, design, and optimization approaches for advanced codes Provides up to date research findings from both highly reputed academics and industry standpoints Presents the latest status of standardization activities for Wireless Systems related to advanced coding Describes real-world implementation aspects by giving insights into architecture solutions for both LDPC and Turbo-codes Examines the most advanced and promising concepts of turbo-processing applications: Turbo-MIMO, Turbo-Equalization, Turbo-Interleaving
Communicating Systems with UML 2. Modeling and Analysis of Network Protocols
This book gives a practical approach to modeling and analyzing communication protocols using UML 2. Network protocols are always presented with a point of view focusing on partial mechanisms and starting models. This book aims at giving the basis needed for anybody to model and validate their own protocols. It follows a practical approach and gives many examples for the description and analysis of well known basic network mechanisms for protocols. The book firstly shows how to describe and validate the main protocol issues (such as synchronization problems, client-server interactions, layer organization and behavior, etc.) in an easy and understandable way. To do so, the book considers and presents the main traditional network examples (e.g. unidirectional flows, full-duplex com-munication, error recovering, alternating bit). Finally, it presents the outputs resulting from a few simulations of these UML models. Other books usually only focus either on teaching UML or on analyzing network protocols, however this book will allow readers to model network protocols using a new perspective and integrating these two views, so facilitating their comprehension and development. Any university student studying in the field of computing science, or those working in telecommunications, embedded systems or networking will find this book a very useful addition.
Verbindungen im Stahl- und Verbundbau
Zentrale Themen des Buches sind geschwei?te und geschraubte Verbindungen im Stahl- und Verbundbau. Daruber hinaus werden auch andere Verbindungstechniken bzw. Verbindungsmittel behandelt, wie z. B. Kontakt, Kopfbolzendubel, Setzbolzen, Niete, Augenstabe, Bolzen, Hammerschrauben, Zuganker, Dubel und Ankerschienen. Auf die Methoden und Vorgehensweisen zur Bemessung und konstruktiven Durchbildung der Verbindungen wird ausfuhrlich eingegangen. Neben den allgemeingultigen Grundlagen werden die Regelungen der DIN 18800 und der Eurocodes behandelt und Erlauterungen zum Verstandnis gegeben. Zahlreiche Konstruktions- und Berechnungsbeispiele zeigen die konkrete Anwendung und Durchfuhrung der Tragsicherheitsnachweise.
Bio-aggregate-based Building Materials. Applications to Hemp Concretes
Using plant material as raw materials for construction is a relatively recent and original topic of research. This book presents an overview of the current knowledge on the material properties and environmental impact of construction materials made from plant particles, which are renewable, recyclable and easily available. It focuses on particles and as well on fibers issued from hemp plant, as well as discussing hemp concretes. The book begins by setting the environmental, economic and social context of agro-concretes, before discussing the nature of plant-based aggregates and binders. The formulation, implementation and mechanical behavior of such building materials are the subject of the following chapters. The focus is then put upon the hygrothermal behavior and acoustical properties of hempcrete, followed by the use of plant-based concretes in structures. The book concludes with the study of life-cycle analysis (LCA) of the environmental characteristics of a banked hempcrete wall on a wooden skeleton. Contents 1. Environmental, Economic and Social Context of Agro-Concretes, Vincent Nozahic and Sofiane Amziane. 2. Characterization of Plant-Based Aggregates. Vincent Picandet. 3. Binders, Gilles Escadeillas, Camille Magniont, Sofiane Amziane and Vincent Nozahic. 4. Formulation and Implementation, Christophe Lanos, Florence Collet, Gérard Lenain and Yves Hustache. 5. Mechanical Behavior, Laurent Arnaud, Sofiane Amziane, Vincent Nozahic and Etienne Gourlay. 6. Hygrothermal Behavior of Hempcrete, Laurent Arnaud, Driss Samri and Étienne Gourlay. 7. Acoustical Properties of Hemp Concretes, Philippe Glé, Emmanuel Gourdon and Laurent Arnaud. 8. Plant-Based Concretes in Structures: Structural Aspect – Addition of a Wooden Support to Absorb the Strain, Philippe Munoz and Didier Pipet. 9. Examination of the Environmental Characteristics of a Banked Hempcrete Wall on a Wooden Skeleton, by Lifecycle Analysis: Feedback on the LCA Experiment from 2005, Marie-Pierre Boutin and Cyril Flamin. About the Authors Sofiane Amziane is Professor and head of the Civil Engineering department at POLYTECH Clermont-Ferrand in France. He is also in charge of the research program dealing with bio-based building materials at Blaise Pascal University (Institut Pascal, Clermont Ferrand, France). He is the secretary of the RILEM Technical Committee 236-BBM dealing with bio-based building materials and the author or co-author of over one hundred papers in scientific journals such as Cement and Concrete Research, Composite Structures or Construction Building Materials as well as international conferences. Laurent Arnaud is a Bridges, Waters and Forestry Engineer (Ingénieur des Ponts, Eaux et Forêts) and researcher at Joseph Fourier University in Grenoble, France. He is also Professor at ENTPE (Ecole Nationale des Travaux Publics de l’Etat). Trained in the field of mechanical engineering, his research has been directed toward the characterization and development of new materials for civil engineering and construction. He is head of the international committee at RILEM – BBM, as well as the author of more than one hundred publications, and holder of an international invention patent.
Self-Organizing Networks (SON). Self-Planning, Self-Optimization and Self-Healing for GSM, UMTS and LTE
With the current explosion in network traffic, and mounting pressure on operators’ business case, Self-Organizing Networks (SON) play a crucial role. They are conceived to minimize human intervention in engineering processes and at the same time improve system performance to maximize Return-on-Investment (ROI) and secure customer loyalty. Written by leading experts in the planning and optimization of Multi-Technology and Multi-Vendor wireless networks, this book describes the architecture of Multi-Technology SON for GSM, UMTS and LTE, along with the enabling technologies for SON planning, optimization and healing. This is presented mainly from a technology point of view, but also covers some critical business aspects, such as the ROI of the proposed SON functionalities and Use Cases. Key features: Follows a truly Multi-Technology approach: covering not only LTE, but also GSM and UMTS, including architectural considerations of deploying SON in today’s GSM and UMTS networks Features detailed discussions about the relevant trade-offs in each Use Case Includes field results of today’s GSM and UMTS SON implementations in live networks Addresses the calculation of ROI for Multi-Technology SON, contributing to a more complete and strategic view of the SON paradigm This book will appeal to network planners, optimization engineers, technical/strategy managers with operators and R&D/system engineers at infrastructure and software vendors. It will also be a useful resource for postgraduate students and researchers in automated wireless network planning and optimization.
Compact Multifunctional Antennas for Wireless Systems
Offers an up-to-date description of modern multifunctional antenna systems and microwave components Compact multifunctional antennas are of great interest in the field of antennas and wireless communication systems, but there are few, if any, books available that fully explore the multifunctional concept. Divided into six chapters, Compact Multifunctional Antennas for Wireless Systems encompasses both the active and passive multifunctional antennas and components for microwave systems. It provides a systematic, valuable reference for antenna/microwave researchers and designers. Beginning with such novel passive components as antenna filters, antenna packaging covers, and balun filters, the book discusses various miniaturization techniques for the multifunctional antenna systems. In addition to amplifying and oscillating antennas, the book also covers design considerations for frequency- and pattern-reconfigurable antennas. The last chapter is dedicated to the field of solar cell integrated antennas. Inside, readers will find comprehensive chapters on: Compact Multifunctional Antennas in Microwave Wireless Systems Multifunctional Passive Integrated Antennas and Components Reconfigurable Antennas Receiving Amplifying Antennas Oscillating Antennas Solar cell integrated Antennas Aimed at professional engineers and researchers designing compact antennas for wireless applications, Compact Multifunctional Antennas for Wireless Systems will prove to be an invaluable tool.
Sustainable Masonry. Stability and Behavior of Structures
This book covers the impact of sustainable masonry on the environment, touting the many benefits of utilizing local and/or low embodied energy materials in the construction of sustainable buildings.
Mauerwerk. Bemessung nach DIN 1053-100
Design calculations and dimensioning of masonry according to the partial safety factor concept is required by the new standard part DIN 1053-100. This book is an introduction for its practice with background information from first hand with numerous examples.