Техническая литература
Различные книги в жанре Техническая литератураSpeech and Audio Signal Processing. Processing and Perception of Speech and Music
When Speech and Audio Signal Processing published in 1999, it stood out from its competition in its breadth of coverage and its accessible, intutiont-based style. This book was aimed at individual students and engineers excited about the broad span of audio processing and curious to understand the available techniques. Since then, with the advent of the iPod in 2001, the field of digital audio and music has exploded, leading to a much greater interest in the technical aspects of audio processing. This Second Edition will update and revise the original book to augment it with new material describing both the enabling technologies of digital music distribution (most significantly the MP3) and a range of exciting new research areas in automatic music content processing (such as automatic transcription, music similarity, etc.) that have emerged in the past five years, driven by the digital music revolution. New chapter topics include: Psychoacoustic Audio Coding, describing MP3 and related audio coding schemes based on psychoacoustic masking of quantization noise Music Transcription, including automatically deriving notes, beats, and chords from music signals. Music Information Retrieval, primarily focusing on audio-based genre classification, artist/style identification, and similarity estimation. Audio Source Separation, including multi-microphone beamforming, blind source separation, and the perception-inspired techniques usually referred to as Computational Auditory Scene Analysis (CASA).
Celebrating the Megascale. Proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson
This volume contains the proceedings of the David Robertson Honorary Symposium: Celebrating the Megascale, held at the TMS 2014 Annual Meeting in San Diego, California. Dr. David G.C. Robertson, Professor Emeritus of Metallurgical Engineering at the Missouri University of Science and Technology, has devoted his career to the education of highly skilled metallurgical professionals and to the science of all types and sizes of metallurgical processes, particularly those involving molten metals. The volume contains more than 70 papers covering the important topics and issues in metallurgy today including papers as follows: keynote papers covering a tribute to Robertson, workforce skills needed in the profession going forward, copper smelting, ladle metallurgy, process metallurgy and resource efficiency, new flash iron making technology, ferro-alloy electric furnace smelting and on the role of bubbles in metallurgical processing operations. Topics covered in detail in this volume include ferro-alloys, non-ferrous metallurgy, iron and steel, modeling, education, and fundamentals.
Satellite Networking. Principles and Protocols
This book provides up to date coverage of the basics of ATM and internet protocols, and characteristics of satellite networks and internetworking between satellite and terrestrial networks Satellite Networking: Principles and Protocols, Second Edition provides up to date information of the original topics in satellite networking and protocols focusing on Internet Protocols (IP) over satellites, broadband over satellites, next generation IP (IPv6) over satellites, new generation of DVB-S/S2 and DVB-RCS next generations and new services and applications. It also includes some analytical techniques for evaluation of end to end IP performance and QoS over satellite, reflecting the recent convergence of telecommunication, Internet, broadcasting and mobile networks. Topics new to this edition: Internetworking with MANET, DVB-S/S2 and DVB-RCS/RCS2 (including TCP/IP over DVB-S/RCS), recent developments in broadband satellite systems, convergence of services and network technologies (including Internet, telecom, mobile, TV, etc.), radio resource management, PEP, I-PEP, SCPS, traffic modelling and engineering with analysis and examples, and future developments of satellite networking. Provides up to date coverage of the basics of ATM and internet protocols, and characteristics of satellite networks and internetworking between satellite and terrestrial networks (e.g. mobile ad hoc networks), including coverage of new services and applications (e.g. Internet, telecom, mobile and TV) Discusses the real-time protocols including RTP, RTCP and SIP for real-time applications such as VoIP and MMC, and explains TCP/IP over satellite and evolution of IPv6 over satellite and beyond
Reliability Technology. Principles and Practice of Failure Prevention in Electronic Systems
A unique book that describes the practical processes necessary to achieve failure free equipment performance, for quality and reliability engineers, design, manufacturing process and environmental test engineers. This book studies the essential requirements for successful product life cycle management. It identifies key contributors to failure in product life cycle management and particular emphasis is placed upon the importance of thorough Manufacturing Process Capability reviews for both in-house and outsourced manufacturing strategies. The readers? attention is also drawn to the many hazards to which a new product is exposed from the commencement of manufacture through to end of life disposal. Revolutionary in focus, as it describes how to achieve failure free performance rather than how to predict an acceptable performance failure rate (reliability technology rather than reliability engineering) Author has over 40 years experience in the field, and the text is based on classroom tested notes from the reliability technology course he taught at Massachusetts Institute of Technology (MIT), USA Contains graphical interpretations of mathematical models together with diagrams, tables of physical constants, case studies and unique worked examples
Environmental Engineering. Principles and Practice
Environmental Engineering: Principles and Practice is written for advanced undergraduate and first-semester graduate courses in the subject. The text provides a clear and concise understanding of the major topic areas facing environmental professionals. For each topic, the theoretical principles are introduced, followed by numerous examples illustrating the process design approach. Practical, methodical and functional, this exciting new text provides knowledge and background, as well as opportunities for application, through problems and examples that facilitate understanding. Students pursuing the civil and environmental engineering curriculum will fi nd this book accessible and will benefit from the emphasis on practical application. The text will also be of interest to students of chemical and mechanical engineering, where several environmental concepts are of interest, especially those on water and wastewater treatment, air pollution, and sustainability. Practicing engineers will find this book a valuable resource, since it covers the major environmental topics and provides numerous step-by-step examples to facilitate learning and problem-solving. Environmental Engineering: Principles and Practice offers all the major topics, with a focus upon: • a robust problem-solving scheme introducing statistical analysis; • example problems with both US and SI units; • water and wastewater design; • sustainability; • public health. There is also a companion website with illustrations, problems and solutions.
Corrosion of Steel in Concrete. Prevention, Diagnosis, Repair
Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.
Formation Testing. Pressure Transient and Contamination Analysis
Traditional well logging methods, such as resistivity, acoustic, nuclear and NMR, provide indirect information related to fluid and formation properties. The “formation tester,” offered in wireline and MWD/LWD operations, is different. It collects actual downhole fluid samples for surface analysis, and through pressure transient analysis, provides direct measurements for pore pressure, mobility, permeability and anisotropy. These are vital to real-time drilling safety, geosteering, hydraulic fracturing and economic analysis. Methods for formation testing analysis, while commercially important and accounting for a substantial part of service company profits, however, are shrouded in secrecy. Unfortunately, many are poorly constructed, and because details are not available, industry researchers are not able to improve upon them. This new book explains conventional models and develops new, more powerful algorithms for early-time analysis, and importantly, addresses a critical area in sampling related to “time required to pump clean samples” using rigorous multiphase flow techniques. All of the methods are explained in complete detail. Equations are offered for users to incorporate in their own models, but convenient, easy-to-use software is available for those needing immediate answers. The leading author is a well known petrophysicist, with hands-on experience at Schlumberger, Halliburton, BP Exploration and other companies. His work is used commercially at major oil service companies, and important extensions to his formation testing models have been supported by prestigious grants from the United States Department of Energy. His new collaboration with China National Offshore Oil Corporation marks an important turning point, where advanced simulation models and hardware are evolving side-by-side to define a new generation of formation testing logging instruments. The present book provides more than formulations and solutions: it offers a close look at formation tester development “behind the scenes,” as the China National Offshore Oil Corporation opens up its research, engineering and manufacturing facilities through a collection of interesting photographs to show how formation testing tools are developed from start to finish.
Tropical and Subtropical Fruits. Postharvest Physiology, Processing and Packaging
Tropical and sub-tropical fruits have gained significant importance in global commerce. This book examines recent developments in the area of fruit technology including: postharvest physiology and storage; novel processing technologies applied to fruits; and in-depth coverage on processing, packaging, and nutritional quality of tropical and sub-tropical fruits. This contemporary handbook uniquely presents current knowledge and practices in the value chain of tropical and subtropical fruits world-wide, covering production and post-harvest practices, innovative processing technologies, packaging, and quality management. Chapters are devoted to each major and minor tropical fruit (mango, pineapple, banana, papaya, date, guava, passion fruit, lychee, coconut, logan, carombola) and each citrus and non-citrus sub-tropical fruit (orange, grapefruit, lemon/lime, mandarin/tangerine, melons, avocado, kiwifruit, pomegranate, olive, fig, cherimoya, jackfruit, mangosteen). Topical coverage for each fruit is extensive, including: current storage and shipping practices; shelf life extension and quality; microbial issues and food safety aspects of fresh-cut products; processing operations such as grading, cleaning, size-reduction, blanching, filling, canning, freezing, and drying; and effects of processing on nutrients and bioavailability. With chapters compiled from experts worldwide, this book is an essential reference for all professionals in the fruit industry.
Airport Engineering. Planning, Design and Development of 21st Century Airports
First published in 1979, Airport Engineering by Ashford and Wright, has become a classic textbook in the education of airport engineers and transportation planners. Over the past twenty years, construction of new airports in the US has waned as construction abroad boomed. This new edition of Airport Engineering will respond to this shift in the growth of airports globally, with a focus on the role of the International Civil Aviation Organization (ICAO), while still providing the best practices and tested fundamentals that have made the book successful for over 30 years.
Building Control with Passive Dampers. Optimal Performance-based Design for Earthquakes
The recent introduction of active and passive structural control methods has given structural designers powerful tools for performance-based design. However, structural engineers often lack the tools for the optimal selection and placement of such systems. In Building Control with Passive Dampers , Takewaki brings together most the reliable, state-of-the-art methods in practice around the world, arming readers with a real sense of how to address optimal selection and placement of passive control systems. The first book on optimal design, sizing, and location selection of passive dampers Combines theory and practical applications Describes step-by-step how to obtain optimal damper size and placement Covers the state-of-the-art in optimal design of passive control Integrates the most reliable techniques in the top literature and used in practice worldwide Written by a recognized expert in the area MATLAB code examples available from the book’s Companion Website This book is essential for post-graduate students, researchers, and design consultants involved in building control. Professional engineers and advanced undergraduates interested in seismic design, as well as mechanical engineers looking for vibration damping techniques, will also find this book a helpful reference. Code examples available at www.wiley.com/go/takewaki